P a g e |
13
◀ ◀
◀
◀ ◀
◀
◀
◀
◀
Battery Release
Button/Latch
◀ ◀
BATTERY INSTALLATION:
Note: The cycle should be turned OFF and the battery
removed when unit is not in use. If the power switch is
left on, the battery loses its charge.
1. Locate battery and orient as shown, it is easier if you
turn the handlebars left or right 45 degrees.
2. Slide battery into slot on the front of the down tube
of the cycle.
3. There is a point where the battery release latch/button provides some resistance.
Push the battery past this point. You should hear a click, and this gap should be
closed.
BATTERY REMOVAL:
1. Turn the handlebar 45 degrees from straight.
2. Depress the battery release latch/button and slide battery out of slot in the
direction shown.
