STACK ST8150 Display System
Chapter 4. Configuring the Display System
User Guide Addendum
11
Low fuel pressure:
Low oil pressure:
Low battery voltage
High boost pressure
High exhaust gas temperature:
Switching Alarms on or off
You can be enable (switch on) or disable (switch off) each of the alarm
warnings by pressing and holding Switch 1 and then pressing Switch 2.
Note that you may change the preset value of the parameter slightly
while pressing both switches. This does not matter when switching an
alarm warning off and, if necessary, you can correct the preset value
after you switch it on again.
Leaving configuration mode
When you wish to return to the normal display, press Switch 4.