STACK ST8150 Display System
Chapter 4. Configuring the Display System
User Guide Addendum
5
Chapter 3. Operating the Display System
The operation of the ST8150 is basically the same as that of the
ST8100. This section highlights any differences.
Changing the display layers
The ST8150 system has three display layers. These differ significantly
from those of the ST8100 and their layouts are shown below.
Each of the display layers can be displayed in turn by pressing switch 3.
Press switch 3 when displaying layer 3 to return to display layer 1.
The format of the values in these displays will vary for systems
supplied outside the UK, as the parameters are displayed in
different units.
Display Layer 1
Display layer 1 shows:
•
Water Temperature (WATER)
•
Oil temperature (OIL T)
•
Exhaust Gas Temperature (EGT)
•
Oil Pressure (OIL P)
Press Switch 3 to see display layer 2.
