Chapter 4. Operation
Stack DVL User Guide
15
Operation
Status Lamp Operation
Description
Ready
Static green
The DVL is ready to record. Video and card OK.
Video OK, No Card
Flashing long red / short
green
In stand-by or unable to record with card not
present or full. Video input OK. If card present,
reformat with FAT32
No Video, Card OK
Flashing long green / short
red
In stand-by (or unable to record) with video not
present but card OK. Check Camera connection
& power or check PAL / NTSC setting OK
No Video, No Card
Fast flashing red
Unable to record. Video and card not present or
full, or system fault.
PC Connected
Flashing equally
green / red
(0.5s red / 0.5s green)
DVL is under external control of the DVR
Configuration Utility.
Recording
100%
Memory
50%
Remaining
10%
Flashing green
External Recording Lamp
also illuminated
Recording OK. The longer the green flash the
greater the memory remaining. With a new card
the Status Lamp will flash for approx. 2.7 seconds
on : 0.3 off. 50% remaining, lamp flashes 1.5 sec
on : 1.5 off. 10% remaining lamp flashes for
0.3 sec on : 2.7 off.
Recording, No Video
Fast flashing green / red
Recording but video is not present, audio only is
being recorded.
Resetting or Busy
Static red
System reset / preparing to record or card format.
Summary of Contents for Motorsport DVL
Page 1: ...Part No ST542113 002 Motorsport DVLs User Guide...
Page 2: ......
Page 6: ......
Page 69: ...Index Stack DVL User Guide 63...
