Chapter 4. Operation
14
Stack DVL User Guide
To start recording close the Record Switch. Once recording,
the Recording Lamp will illuminate and the Status Lamp will
flash green for 3 seconds with a mark space ratio showing
the capacity remaining:
With an empty Compact Flash card the Status Lamp will
flash for approximately 2.7 seconds on : 0.3 seconds off.
With approximately 50% capacity remaining it will flash
1.5 seconds on : 1.5 seconds off.
With approximately 10% remaining the Status Lamp will
flash for 0.3 seconds on : 2.7 seconds off.
To stop recording, open (switch off) the Record Switch. The
Status Lamp will revert to showing static green and the
Recording Lamp will be extinguished.
!
Do NOT remove the CF card whilst recording is in progress
because the data will be corrupted (see page 18).
The Compact Flash card may now be removed and placed
into a PC with a suitable Compact Flash card slot card slot.
The table below shows the function of the DVL‟s front panel
Status Lamp. Green generally indicates the unit is
functioning correctly and red indicates a fault or reset
condition.
Summary of Contents for Motorsport DVL
Page 1: ...Part No ST542113 002 Motorsport DVLs User Guide...
Page 2: ......
Page 6: ......
Page 69: ...Index Stack DVL User Guide 63...
