16
5.
Close the door far enough to un-hook the strut hook from the lip below the main frame. Slowly let the door
back down while pulling in on the L-linkage to allow the slide to pass by the edge of the cabinet. You may want
to have something handy to support the door on since it will no longer be held by the strut.
You can remove the door without removing the feed shelves. If you would like to remove the door without
removing the feed shelves lift all the shelves up until they lock into position and continue with step 9.
6.
Starting with the shelf closest to the control panel,
lift the shelf far enough that you can remove the
shelf support from the loop strap.
7.
After removing both sides of the shelf support
from the loop straps twist the shelf support sideways
and slide it out from under the shock cord.
8.
Lay the shelf back down. Pull up on the center of
the shelf while holding the opposite side down. This
will flex the shelf enough to allow the hinge pins to
slide out of the hinge holes. Now you can remove
the shelf. Repeat step 6-8 for the remaining shelves.
9.
Remove the six 10-
32 x ¾” Phillips Flathead
screws that attach the hinges to the cabinet and
remove the door.
Reverse these steps to re-install the door.
