15
Removing the Strut and Door
This is not necessary for initial setup. It is only necessary to do this if the strut needs to be replaced or the door
needs to be removed for some reason.
1.
Open the door and place the slot of the strut hook
over the slide at the top of the L-linkage.
2.
Lift the door enough to hook the other end of the
strut hook under the lip of the manger just below the
main frame
3.
Using a 7/16 wrench remove the nut and nylon
washer that attaches the straight linkage to the L-
linkage.
4.
Push down on the door enough to relieve the
pressure on the straight linkage. Slide the straight
linkage off the stud on the L-linkage. You may need
to move the door up and down slightly to
accomplish this.
