2
Congratulations on your purchase of the
Stable Grazer® Generation II
automatic hay feeder. The
following instructions may be used as a general guide for installing the
Stable Grazer® Generation II.
If you are unsure of your ability to install the
Stable Grazer® Generation II
you should consult a
licensed contractor. Before modifying any structure, consult with your local building inspector to be
certain of your local and state building codes.
The
Stable Grazer®
is very versatile and can be mounted almost anywhere. Several different
installations will be covered in this guide. Whichever installation you choose, it is recommended that
the feeder be installed in such a way that your horse can not access the door. If your only choice is to
install the feeder so your horse has access to the door, it will be necessary to install some type of
device to keep the horse from rubbing on the door area. The following installations are for reference
only. Each situation is different, therefore making it impossible to give exact information.
You are
responsible for determining your own measurements.
Contents
Misc. Parts…………………………………………………………………………...Page 3
Install Handle & Remove Shipping Strap....………………………………………...Page 4
Stall Front Installation……………………………………………………………….Page 5
Wall Installation (feed through the wall)……………………………………………Page 9
Post Mount…………………………………………………………………………Page 11
Battery Installation…………………………………………………………………Page 14
Removing the Door & Strut………………………………………………………..Page 15