LAX 600 series
7
en
5. Functions
5.1 Selecting laser functions
Once the unit has been switched on using the sliding switch,
the "Laser lines" button can be used to set the various laser
functions, as required.
To indicate that the unit is switched on and the transport
lock is open, it is not possible to switch off all of the laser
lines at the same time via the "Laser lines" buttons.
One laser line therefore always remains activated and
visible. All of the laser lines can only be switched off via
the sliding switch or via the "man" button in manual mode.
5.2 Working with the receiver
Pulse mode must be activated for work completed
over larger distances or using a suitable receiver.
Note:
The receiver must be suitable for pulsed line lasers
and for the colour of the laser beam.
