LAX 600 series
9
en
7. Using the SWB10 bracket
The LAX 600 / LAX 600G can be attached and aligned on
walls or profiles using the SWB10 bracket. The clamp can
be used to attach the bracket to interior construction
profiles. The hanging hole enables it to be hung on nails
or hooks.
The LAX 600 / LAX 600G is bolted to the retaining bracket.
Using the magnet surface, the retaining bracket is either
attached to the sliding plate on the bracket or directly to
magnetic metal surfaces.
The bracket must roughly be aligned vertically using
the adjusting screw, so that the LAX 600 / LAX 600G
is in the self-levelling range.
Once the clamping screw has been released, the
LAX 600 / LAX 600G can be moved upwards by 11 mm / 0,4”.
The exact height is set using the fine adjustment.
