ST Micro Connect 2
Programming a development board EPLD
7912386 Rev 12
35/58
6.2.1
Examples of using epldprog
In the following examples, the convertor type is automatically detected.
The following example inspects the EPLD values:
% epldprog
my_stmc2
INFO mb628_02.jbc
Where:
my_stmc2
is the IP address (or name) of the ST Micro Connect 2
the
INFO
command is used to display the EPLD values contained in the file
mb628_02.jbc
The next example programs the EPLDs on the STi7141-MBoard (MB628):
% epldprog
my_stmc2
PROGRAM mb628_02.jbc
Where:
my_stmc2
is the IP address (or name) of the ST Micro Connect 2
PROGRAM
is the command to program and verify the EPLD
mb628_02.jbc
is the JBC file containing the information for programming the EPLDs
In this example, to check the EPLD and the JBC file have no conflicts, use the following
command:
% epldprog
my_stmc2
VERIFY mb628_02.jbc
If the board is powered down, it can be remotely powered up by using an additional option
(
--parameters "module_function=mb628_power"
). This specifies the Python
module that powers up the board:
% epldprog --parameters "module_function=mb628_power"
my_stmc2
VERIFY mb628_02.jbc
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
