WIND ID
WIND message
Variables
Description
Application notes
59
Reserved
60
Reserved
61
"Incoming Socket Client"
%i:%u:%u:%u
Client IP, client Port, server ID, client ID
62
"Socket Client Gone"
%i:%u:%u:%u:
%u
Client IP, client Port, server ID, client ID, closure reason
63
"Socket Dropping Data"
%u:%u:%u
Server ID, client ID, dropped bytes
64
"Remote Configuration"
%s:%s
Configuration item, configuration value
Item called “Key” is
only shown when
different from
user_desc password
65
"Factory Reset"
%u
Restore Reason. Values Range
0.
GPIO0 high at start-up, or reset line not stable
1.
CRC check failure on saved configuration
66
"Low Power Mode"
%u
Powersave Value. Values Range
1.
Standard Powersave
2.
Fast Powersave
67
"Going into Standby"
%u
Configured Standby Time
68
"Resuming from Standby"
69
"Going into DeepSleep"
70
"Resuming from DeepSleep"
71
Reserved
72
"Station Disassociated"
%m:%u
Peer MAC Address, reason code
73
"System Configuration
Updated"
74
"Rejected found Network"
75
"Rejected Association"
%04x
Rejection Reason. Values Range
Shown when cw1100 cannot be configured
0xffff – shown when WPA Supplicant was not able
allocate memory
76
"WiFi Authentication Timed
Out"
77
"WiFi Association Timed
Out"
78
"MIC Failure"
79
Reserved
80
"UDP Broadcast Received"
%u:%i:%u:%u:
%s
Server ID, Client IP, client port, datagram size, datagram
content
81
"WPS generating DH keyset"
82
"WPS enrollment attempt
timed out"
83
"Sockd Dropping Client"
%u
Dropping reason
1.
Not enough RAM to allow access to socket client
2.
Too many clients are connected (only when UDP)
84
"NTP Server Delivery"
%u.%u.%u:%u:
%u.%u.%u
Year, month,day,day of week, hour, min,sec
UM2114
Synchronous errors and WIND messages
UM2114
-
Rev 3
page 58/66
