Parameters:
<filter>
Range of possible values is: d → no filter, s → filter on ssid, m
→ filter on the mac
<filename>
Default:std output. When specified, the output of the
command is saved in the
<filename>
file.
6.36
AT+S.SSIDTXT
AT+S.SSIDTXT allows to get/set the current value of the variables wifi_ssid and wifi_ssid_len as text strings
Usage:
AT+S.SSIDTXT<cr>
get the value of the variable wifi_ssid.
AT+S.SSIDTXT=<ssidtxt><cr>
set the value of the variables wifi_ssid and wifi_ssid_len
Parameters:
<ssidtxt>
SSID in textual format
Result:
AT-S.Network:<SSID>
<SSID>
Specifies the SSID of current configured network
6.37
AT+S.PING
Send a single ICMP ECHO request to a specified remote host. When IPv6 is enabled, every network request for
name resolution will use IPv6 at the beginning. This means that WIND:24:IPv6 must be waited when ip_use_v6.
Usage:
AT+S.PING=[<counter>],[<size>],<hostname><cr>
Parameters:
<counter>
Default value:1. Number of echo requests to send
<size>
Default value:56 bytes. Highest size of the echo packet. Every
sent, or incoming, request will be truncated
<hostname>
Remote Host. DNS resolvable name or IP address
UM2114
AT+S.SSIDTXT
UM2114
-
Rev 3
page 26/66
