Variable name
Default value
Type
Description
wifi_ht_mode
1
INT
Enable the 802.11n mode. The 11n data rates
must be enabled with the wifi_opr_rate_mask
variable (i.e. wifi_opr_rate_mask=3FFF CF to
enable all the data rate supported)
wifi_channelnum
1
INT
Channel number to use for MiniAP operation.
The user must properly set the channel
number to not violate IEEE 802.11 Wi- Fi/
WLAN standards.
wifi_opr_rate_mask
0x003FFFCF
INT
BIT0: 1 Mbps
BIT1: 2 Mbps
BIT2: 5.5 Mbps
BIT3: 11 Mbps
BIT6: 6 Mbps
BIT7: 9 Mbps
BIT8: 12 Mbps
BIT9: 18 Mbps
BIT10: 24 Mbps
BIT11: 36 Mbps
BIT12: 48 Mbps
BIT13: 54 Mbps
BIT14: MCS0 (6.5Mbps)
BIT15: MCS1 (13Mbps)
BIT16: MCS2 (19.5Mbps)
BIT17: MCS3 (26Mbps)
BIT18: MCS4 (39Mbps)
BIT19: MCS5 (52Mbps)
BIT20: MCS6 (58.5Mbps)
BIT21: MCS7 (65Mbps)
wifi_bas_rate_mask
0x0000000F
INT
Basic data rate mask, 0x0000000f is
[1,2,5.5,11]
wifi_mode
1
INT
Radio mode.
0=IDLE
1=STA (Supported Security Modes: OPEN,
WEP OpenSystem, WEP SharedKey, WPA/
WPA2 - wifi_auth_type must be set to 0,
WPA-Enterprise)
2=IBSS (Supported Security Modes: OPEN,
WEP OpenSystem, WEP SharedKey)
3=MiniAP (Supported Security Modes: OPEN,
WEP OpenSystem, WPA/WPA2 -
wifi_auth_type must be set to 0, Supported
Classes: b,g) *
wifi_auth_type
0
INT
Authentication type used in STA, IBSS and
MiniAP mode: 0=OpenSystem, 1=SharedKey
wifi_atim_window
0
INT
Reserved
wifi_powersave
0
INT
Allows choosing between Active (0), PS (1) or
Fast-PS (2)
wifi_tx_power
18
INT
Transmit power [from 0 to 18], in dBm
UM2114
Variables and values
UM2114
-
Rev 3
page 44/66
