ST SPWF04S Series User Manual Download Page 15

Page: 15 / 66

6.9

AT+S.SCFG

Command to set the value of the named configuration variable. The value is saved in the RAM until the command
AT+S.WCFG is used.
Usage:

AT+S.SCFG=<key>,<value><cr>

Parameters:

<key>

variable to configure

<value>

value to be set

6.10

AT+S.WCFG

Command to save the configuration set to the Flash.
Usage:

AT+S.WCFG<cr>

Parameters:

None

6.11

AT+S.FCFG

Command to restore the factory configuration variables from the Flash. It is mandatory to run a reset (HW or SW)
after a factory restore.
Usage:

AT+S.FCFG<cr>

Note:

HW factory restore of the variables is performed by pulling the pin GPIO0 high at power-up (until the
“+WIND:1:Poweron” indication is printed). In order to use the HW factory reset (GPIO0 enabled) and
FWUPDATE at the same time, see

Section 6.13 AT+S.FSUPDATE

Parameters:

None

6.12

AT+S.FSWRITE

The command is used to update the external volume via serial interface.

Note:

The HW flow control MUST be enabled in order to use the command via UART.

Usage:

UM2114

AT+S.SCFG

UM2114

Rev 3

page 15/66

Summary of Contents for SPWF04S Series



































































Search results

Summary of Contents for SPWF04S Series

Reviews:

Related manuals for SPWF04S Series

Brands by name

Popular brands

ST SPWF04S Series, User Manual

Search results

Summary of Contents for SPWF04S Series

Reviews:

Related manuals for SPWF04S Series

Brands by name

Popular brands