7
PC-EFTPOS i3070 MERCHANT OPERATING GUIDE – GETTING STARTED
•
Internet Protocol (IP) Gateway (provided by PC-EFTPOS)
Connection to each communication method varies.
2.4.1 Dial up Connection.
The PC-EFTPOS i3070, using a dial up connection, requires the use of a dial up phone line,
supplied by you, and the installation of a P68 modem. The modem is supplied by the
Bank and installed by you or your POS vendor.
The P68 modem kit includes:
•
the P68 modem
•
a detachable power supply and cable
•
a Y powered curly cord (power and telephone cable)
•
a telephone cable adaptor
•
a serial cable (DB9 to RJ12)
To connect the modem:
1. Place the modem on a clear, flat surface close to a mains power outlet and telephone
socket. The connectors are located underneath the modem as shown.
2. Plug the RJ12 phone connector on the curly end of the Y powered curly cord into the
socket marked
.
3. Plug the opposite end of the RJ12 curly cord into the telephone cable adaptor, which
inserts into the telephone wall socket.
4. Plug the DC connector on the curly end of the Y powered curly cord into the modems
power socket.
5. Plug the opposite ends DC connector into the modem power supply.
6. Plug the RJ12 end of the serial cable into the socket on the base of the modem marked
RS232-1.
7. Plug the other end of the serial cable into a COM port on the back of the PC and secure
it in place.
8. Plug the power supply into a mains power outlet.
235220_ST21532_0611.indd 7
4/07/11 4:42 PM
