INSTALLATION CHECK LIST
BEFORE INSTALLATION
1.
Thoroughly read and understand this manual. SAVE THIS MANUAL.
2.
Check with local authorities and obtain needed permits.
3.
It is strongly recommended that the stove receive a Dealer’s “Pre-delivery Check” prior to
installation.
4.
We recommend installation by a qualified professional.
BEFORE STARTING THE STOVE FOR THE FIRST TIME
1.
Outside combustion air is recommended for all installations. Use only approved parts.
Check that the outside air inlet is connected to draw fresh air from outside the building.
2.
All joints of PL vent and single wall stainless steel pipe should be fastened by at least 3
screws and correctly installed. (Follow vent manufacturer’s instructions).
3.
Any “plated” areas should be cleaned thoroughly with a glass cleaner such as Windex® and
a soft cloth just before lighting the first fire. This will remove finger prints and oils that may
cause a permanent stain or mark on the gold plating the first time it is heated. Never use an
abrasive cleaner or material on any plated or painted surfaces. Never clean the plated
surfaces when stove is hot.
4.
WARNING: The high temperature paint on this stove may take several hours of burning at
a high fuel setting to cure fully. During this time, an odor which is not harmful, may be
evident. When odors are present, the area around the stove should be well ventilated.
5.
Caution: The high temperature paint can be easily scratched prior to burning the stove.
2
Summary of Contents for York Insert
Page 11: ...York Insert Dimensions 10 ...
Page 27: ......
