ELECTRICAL CONNECTIONS
1. Freestanding and insert stoves are provided with a grounded electrical power cord that can
extend from the rear of side. This should be connected to a standard 120 volt AC electrical
outlet. The current requirement is approximately 3 amps.
2. The power cord must be carefully routed to avoid contact with any hot or sharp exterior
surface areas of the stove. (Figure 11B) Any stove installed in a mobile home must be electri-
cally grounded to the steel chassis of the home and bolted to the floor in Model compliance
with, and according to building code requirements.
3. In Canada, the electrical installation must meet the applicable requirements fo CSA C22.2.
Figure 11B.
Insert Electrical Power Routing
18
Power Cord routed through grommet
in Right Side Surround Panel.
Non Combustible
Hearth in front of
Fireplace
Summary of Contents for York Insert
Page 11: ...York Insert Dimensions 10 ...
Page 27: ......
