Ashby-P Insert
44
Figure 29
1.
Heat Exchange Baffle.
Remove the baffle and clean the ashes that accumulate on a
regular basis. Once a month or sooner, depending on the quality of fuel being used
(See Figure 30)
Clean the baffle on a regular basis. Frequency of cleaning depends on amount of fuel
being burnt and the quality of the fuel. Fuel with low ash content is recommended.
Failure to clean the baffle can cause the Ashby-P Insert to become plugged with fly
ash.
To remove the baffle, simply lift the baffle up off of the brick and remove from the insert.
Figure 30