Ashby-P Insert
25
USE OF A THERMOSTAT
The Ashby-P offers our customers the optional feature of thermostatically controlling your new stove.
By using a thermostat to control the operation of your Pellet stove, you can benefit two ways. First of
all, after setting the thermostat to your desired heating needs the stove will operate accordingly to
uniformly maintain your desired temperature setting. Secondly, the fuel consumption is being
optimized, which ultimately results in lowering your seasonal heating costs.
While the room temperature remains cooler than your desired thermostat setting, the stove will operate
at any of the 5 HEAT ADJUST selector positions. Read the Operations manual to determine which
Thermostat Mode you want to use. You can choose between the T-Stat Mode and the Smart-Stat mode
1.
Once you have successfully lit your stove, set the thermostat to your desired heating needs.
2. Set the HEAT ADJUST selector to a position that will effectively create a rise in room temperature
above your thermostat setting. The recommended heat settings while using a thermostat are any Heat
Level between 2 through 5.
Thermostat Hook-up
To hook up a thermostat connect the wires from the thermostat to the two white wires with red
stripes in the harness. These wires are located on the right side of the stove and are labeled T-Stat.
NOTE:
Installers
must
determine a neutral location of
where to mount the thermostat
panel in order for accurate room
temperature measurements.
Read the Frequently Asked
Questions
section
in
the
Operations
Manual
to
Troubleshoot the Thermostat.
Figure 16