16
E. Drill a pilot hole at the places just marked with a 1/8” drill bit. Then follow up by using a 1/4” drill bit for both pilot holes (for mounting the pod).
E2
E1
G. Position the speaker pod in place and line up with drilled
mounting holes
G
H
F. Route the speaker cable attached to the pod through the inside
footwell 1/2” hole made in Step D.
I. Connect the B-H1149 cable to the speaker pods and zip tie all
cables to the frame
J. Connect the speaker harness to the amplifi er
H. With the provided M6 screws and washers, loosely mount the pod through the 3 holes previously drilled. Once all screws have been
inserted into the pod, hand tighten all 3 screws.
F
H
I
J
