MGW/920 Smart Metering Gateway- First Steps
M a n u a l R e v i s i o n 1 . 1
3
1
INTRODUCTION
The default configuration of an MGW/920 Smart Metering Gateway contains one
10/100 Mbps Ethernet LAN interface and one M-Bus master interface for up to ten external
M-Bus meters.
For using the MGW/920 you need an Ethernet link to your PC or to an Internet router. This
link needs a standard Ethernet patch or cross-over cable.
1.1
Safety Guidelines
Please read the following safety guidelines carefully! In case of property or personal
damage by not paying attention to this document and/or by incorrect handling, we do
not assume liability. In such cases any warranty claim expires.
ATTENTION: Observe precautions for handling – electrostatic sensitive device!
•
Discharge yourself before you work with the device, e.g. by touching a heater of
metal, to avoid damages.
•
Stay grounded while working with the device to avoid damage through electrostatic
discharge.
1.2
Conventions
Convention
Usage
bold
Important terms
italic
Filenames, user inputs
monospace
Pathnames, program code, command lines
Table 1:
Conventions used in this Document
