MGW/920 Smart Metering Gateway- First Steps
12
M a n u a l R e v i s i o n 1 . 1
The first command line creates an ARP table entry for the IP address
192.168.0.10
and the MAC address
02-80-AD-20-D3-7F
. The second command line sends an
ICMP echo request to the device with the MAC address
02-80-AD-20-D3-7F
. This
request contains the new IP address
192.168.0.10
.
Change the IP address and the MAC address of the two command lines. Use the IP ad-
dress of your needs and the given MAC address from your MGW/920.
Then reboot the MGW/920. After a few seconds the MGW/920 responds to the ping with
the new IP address.
