SST SST-PFB-SLC, User Manual

Page: 38 / 117

SST-PFB-SLC User’s Guide
30
5.1.3 RS Logix 500
This procedure was tested with version 2.10.12.0 of RS Logix 500.
1. Create a new program offline.
2. Select the SLC processor, memory, and operating system.
3. In the project tree, double click on I/O Configuration.
4. Set the rack size for rack 1.
5. Highlight the slot in which the SST-PFB-SLC is located
6. Double click on Other in the list of available modules and enter the
scanner ID code (
13635
).
7. Highlight the scanner and click on the Adv. Config button.
8. Set the M0 length and M1 length to 4200.
9. If you are using fewer than 32 input words or 32 output words, you
can change the scanned input and output words.
10. You do not have to set the G File Length or set an Interrupt Service
Routine number.
11. Click OK to exit Advanced I/O Configuration.
12. Close the I/O Configuration dialog box.
13. Create the rest of your control program.
14. Save the file and download it to the SLC.
Note
When you are configuring the scanner, ensure that the SLC is
in PROGRAM mode.