User Manual
EtherNet to CAN Gateway
GT200-MT-CA
WWW.SSTCOMM.COM
10
ENS (Orange) and CNS
(Orange)
(Orange: Red and green
light on at the same
time)
Blink alternately
Configuration Mode
ENS red, CNS red
Blink
Simultaneously
three times
Using locate function
Configuration Mode: After power on, the ENS and CNS orange light on simultaneously, and then flashes
alternately, showing the gateway is in the state of configuration;
Run Mode: After power on, ENS and CNS orange light on simultaneously, and then ENS red light flashes
a while then becomes green light blinking, CNS turns to green light on. It indicates TCP Server connection has
not been established, while the CAN network is normal. When the Client connection has been established,
ENS and CNS green light are on.
3.2.3 TCP Client
The indicator light shows the following table:
Table 3 TCP Client status indicator
Indicators
Status
Descriptions
ENS
(Ethernet status
indicator)
Green on
Connection with the server has been established
Blinking(Green)
Connection with the server has not been
established
Red on
DHCP
status
CNS
Blinking three times
(Red)
CAN network error
Red on
CAN network normal
ENS (Orange) and CNS
(Orange)
(Orange: Red and green
light on at the same
time)
Blink alternately
Configuration Mode
ENS (red), CNS (red)
Blink three times
simultaneously
Using locate function
Configuration Mode: After power on, the ENC and CNS orange light on, and then flashes alternately,
showing the gateway is in the configuration mode;
Run Mode: After power on, ENS and CNS orange light are on simultaneously, ENS red light flashes a
while then becomes green light blinking, CNS turns to green light on. It indicates TCP Client connection has
not been established, while the CAN network is normal. When the Client has succeeded in connecting Server,
ENS and CNS green light are on.