www.sstcomm.com
52
“Port” is the serial port being used; “Baudrate” is current serial port baud rate set by DIP switches.
After configuring parameters, click “Initialize” to establish the connection and initialize hardware
configuration.
When choosing “Use UART setting mode”, click “Initialize” to send initial messages and enter the running
status.
If “Use UART setting mode” is not chosen, click “Initialize” and enter the running status directly.
If the connection is established successfully, all the options in the Parameters Configuration section will be
grayed, “Run” button will change to “Stop” and “Transmit” button will change to be usable.
