73
The base station must remain ener
-
gized during the reset, otherwise a
correct reset cannot be performed.
Procedure:
1
Unplug the patch cable for the
In-Home bus at the base station.
2
Press the
Prog.
button at the base
station (e.g. using a straightened
paper clip or similar) and hold it
down until you have carried out the
following steps.
3
Plug the patch cable for the
In-Home bus back into the base
station.
4
When the
Prog.
LED flashes twice,
release the
Prog.
button.
5
The delete process has started, the
reset is in progress.
6
The
Status
LED on the front of the
base station flashes red to indicate
that the reset is in progress.
7
As soon as the reset is completed,
the LED status flashes green.
Power
Line
In-Home
Prog.
LAN