SSP North AB
30/08/2018
Manual V2f
105
14.1 Inputs
14.1.1 Two-Hand Device
Block diagram
Description
This block can be used for a Two-Hand device according to EN 574 input.
Pins: 2 or 4
Inputs
None
Outputs
•
ON
This output is 1 (HIGH) when the function is in ON state, which is when all pins receive their
configured ON-state signal type and all timing requirements are met. It is 0 (LOW) when any
criteria for the function to be in ON state are not met.
•
ERROR
This output is 1 (HIGH) when the function is in ERROR state.
Properties
•
Comment
Changes the comment text above this block.
•
Enable ERROR Output
Enables or disables the ERROR output connector.
