Ssl M325USA, User Manual

Page: 9 / 20

8
GENERAL OPERATIONS
If you press the Vol/SEL button (3) for several seconds, it will activate a
cycling mode of the following functions for user's selection.
Press and hold this button to go to DSP Mode. By turning this function
button, you will cycle thru Flat, Classic, Pop and Rock. Press the function
button to select your favorite DSP mode.
When in DSP mode, pressing the function button once will take you to ESP
Mode. Turning the function button will allow you to choose 12 seconds or 45
seconds ESP. Press the function button to select your desired ESP setting.
When in DSP mode pressing the function button twice will take you to Beep
Mode, (the key pad tone). Turning the function button will allow you to
choose ON or OFF. Press the function button to select.
This function allows the user to set the volume level of the unit after it was
turned off and then turned on again. Choose VOL LAST if you want the
volume level to be the same as it was before turning off. VOL ADJUST
allows to choose volume level.
SEEK 1: When SEEK 1 mode is activated, AUTO SEEK SCAN is stopped
when station is detected even user still push SEEK button.
SEEK 1: When SEEK 1 mode is activated, AUTO SEEK SCAN is stopped
when station is detected even user still push SEEK button.
SEEK 2: Auto SEEK SCAN is not stopped even if station is detected if user
pushes SEEK button. When releases SEEK button, then stop when station
is detected.
Press button (5) to go to different functions.
OTHERS ADJUSTMENT
VOL LAST/ADJUST
SEEK MODE
SELECT MODE