Ssl M325USA, User Manual

Page: 11 / 20

10
RADIO OPERATION
MO/ST SELECTOR
LOC/DX SELECTOR
LOUDNESS ON/OFF
SCAN
BAND SELECTION
STATION SELECTION
Press ST(20) button to select MONO or STEREO mode.
When “ST” appears in the LCD display. During the Fm receiver mode, press
the button to switch mono or stereo.
Press LOC(21) button to select strong or weak station reception. It is set to
LOC mode when LOC(21) button is first pressed. “LOC” appears and only
local station is available. It is switched to DX mode when LOC(21) button
is pressed again. Both distance and local stations can be received.
Press LOU(22) button to increase the low frequency. This can improve the
sensitivity of your ears. And “LOUD” appears in the LCD when the loudness
mode is activated.
Press scan button (29) to search radio stations. When a station signal
strength level is good, the radio will play that station for 5 seconds.
The Frequency will blink on the LCD during this process.
Press and hold scan button(29) more than 3 seconds to select the station
which you desired. The radio will stop scanning and play that station.
At tuner mode, press BAND button (10) to select the desired band. The
reception band will change in the following order:
Press TUNE/SEEK/TRACK FORWARD button (11) or TUNE/SEEK/TRACK
REVERSE button (12) shortly for manual tuning function.
When pressed for several seconds, the automatic tuning mode
(SEEK mode) is activated.
RADIO OPERATION
FM1 FM2 FM3 AM1(MW1) AM2(MW2)