INS-TSSHC-3DNPSB-16A-115F-1210
12
3. Activate the Automatic mode by simultaneously pressing
down the (+) and (-) buttons for at least 3 seconds. The
Automatic mode icon will appear. If the Automatic mode was
already activated, the same procedure should be used to
deactivate it.
4. When the adjustment is completed, release the buttons and
wait for 5 seconds to exit the adjustment function.
N.B.
It is always possible to manually change the Day/Night mode
during a 24-hour cycle. This will not change the 24-hour cycle
and the automatic return to the Night mode. However, the
automatic mode will be deactivated is the thermostat is set
OFF.
When turning back on after being powered off (because of
a power failure, for example), the automatization of the Day/
Night modes is deactivated, and, if previously activated, the
icon that corresponds to this mode will blink. The blinking will
stop as soon as you press down a button.
