SSHC TSSHC-3DNPSB-16A-115F User Manual Download Page 3

Page: 3 / 20

INS-TSSHC-3DNPSB-16A-115F-1210

1. Description

The TSSHC-3DNPSB-16A-115F non programmable electronic

thermostat can be used to control electric heating units such

as ENERJOY radiant ceiling panels, electric baseboards,

convectors, or aeroconvectors. It keeps the temperature of a

room at the requested set point with a high degree of accuracy.

The Automatic mode feature allows to this thermostat to be

Semi-programmable. This product is designed for installations

with electrical current - with a resistive load - ranging from

0 A to 16 A (90 VAC to 240VAC). It possesses a user-friendly

interface. Furthermore, it gives you the possibility to control the

temperature of a room with great precision.

This Thermostat is not Compatible with the Following
Installations:
• electrical current higher than 16 A with a resistive load (3840 W

@ 240 VAC, 3330 W @ 208 VAC and 1920 W @ 120 VAC);

• central heating system;
• inductive load higher than 3A.

Parts Supplied:
• one (1) thermostat;
• two (2) mounting screws;
• four (4) solderless connectors suitable for copper wires.

Summary of Contents for TSSHC-3DNPSB-16A-115F




















