– 8 –
Internal Access for Electrical and Pneumatics
WARNING: DO NOT ATTEMPT TO SERVICE THIS EQUIPMENT
IF YOU ARE NOT A QUALIFIED REPAIR TECHNICIAN
OPEN/CLOSE
(G) Ground is connected between the
Clamshell design enables access to
receptacle and the pump bracket.
components. All 6-32 Phillips Head
(H) DC Receptacle
Fastening screws located in back of the
(I) Battery Bracket
unit.
(J) Battery, 12V, Sealed Lead Acid
REMOVE MAIN CHASSIS
(L) Vaccum pump. Return to SSCOR for
SCREWS
service. Do not attempt to service the pump.
(A) 1 screw under the canister holder
(M) Exhaust barb
(B) 2 screws in the back of the handle
(N) Vaccum barb
(B) 3 screws in the back of the main chassis
(C) It should not be necessary to open the exhaust door unless fluids have entered the system.
Slowly pull the unit apart at the handle to observe internal components.
TO REMOVE CANISTER HOLDER:
Remove one 4” screw and two set screws on the canister bracket. Lift canister holder up
and out of the main chassis.
H G
N
L
M
J
I