SRS Light Design s.r.o
, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417,
fax:+421244681419,
www.srslight.com
,
W-DMX Receiver/Splitter
You can use the DST4W-PRO as a Receiver with the Splitter output.
There is an automatic back-up of the W-DMX line using the cable connection. If the W-DMX
is linked to the transmitter and the signal quality is poor, the W-DMX active LED goes off
and the splitter will retransmit signal from cable in/thru port. In normal state, when the W-
DMX signal quality is good, the W-DMX active LED is on.
The W-DMX button has only one function – logging off from the linked transmitter.
W-DMX LED signalization in the Receiver mode:
Receiver Mode unlinked
MODE LED is GREEN and the receiver W-DMX LED is RED. The bargraph does not show
the signal strength.
Receiver Mode linked
MODE LED is GREEN and the receiver W-DMX LED is RED or GREEN according to the DMX
connection on the Transmitter’s side. The bargraph shows the signal strength.
