SRS Light Design s.r.o
, Rybničná 36/D , 831 06 Bratislava, Slovak Republic tel:+421244681417,
fax:+421244681419,
www.srslight.com
,
W-DMX Transmitter/splitter
You can use the DST4W-PRO in the Transmitter and DMX splitter mode at the same time.
The DMX signal from input/thru is sent out via Wireless DMX to all other linked W-DMX
devices.
Signal bargraph LEDs are blinking in a row to indicate that the module is in the
Transmitter mode.
W-DMX button has two functions:
Short press:
Linking unlinked Receivers,
Long press
:
Unlinking all linked Receivers
W-DMX LED signalization in Transmitter mode:
Transmitter without DMX
MODE LED is GREEN and the W-DMX LED is RED or GREEN according to the status of the
DMX connected to the in/thru port.
To add an unlinked Receiver, press the W-DMX button for a second. The unlinked
Receiver will start to blink fast.
After a successful pairing, the W-DMX buttons on both units will blink slowly showing the
same status of the DMX connected to the Transmitter.
Transmitter with DMX
DMX is connected to the Transmitter and transmitting the W-DMX signal. W-DMX LEDs on
both Receiver and Transmitter are GREEN.
Bargraph is active and shows the W-DMX signal strength and the DMX status on the
Receiver.
