( 5 / 12)
4.
GMC8-LV series base unit
4.1 GMCseries front panel
4.2 Hoist protection:
•
GMC12:
Each three hoist are protected by single C10/3p MCB
•
GMC8:
Each two hoist are protected by single C10/3p MCB
*C16 or C20 are equipped on request
4.3 Power key switch positions:
•
OFF:
Power off / Only battery charger is active in this state/
•
PICKLE:
Power to the hoist is enabled
•
AUTO:
Power to the hoist is enabled when GO command is received
4.4 GROUP STOP key switch positions:
•
OFF:
Trip of any breaker or mains GFI breaker will not cause E-STOP
•
ON:
Trip of any breaker or mains GFI will cause E-STOP of unit
4.5 RESET:
Reset button for SIL3 e-stop relay reset. Needs be pressed every time when unit has been turned
on, E-STOP mushroom has been pressed or when the GROUP stop has been activated.
4.6 EMERGENCY STOP:
E-Stop is red color mushroom. Once the E-STOP button has been pressed, it locks into the active
position and must be rotated clockwise and released before disengaging. After engaging the E-stop
button the RESET need to be pressed to reset system.
Summary of Contents for GMC12-LV-H6
Page 11: ...11 12...
