( 4 / 12)
3.2 To Move a Single/Several hoist:
•
Set the UP/DOWN toggle switch for that motor to the desired direction. The associated LED
should light Green for UP, or Red for DOWN direction
•
Hold the GO button until the motor are moved the desired height, then release.
3.3 Link of Base units:
Two or up to 30 units can be linked via link connector located on front panel.
For link you’ll need 5pin DMX data cable.
Due safety requirements link works only in LOCAL / LINK MODE of controller
Summary of Contents for GMC12-LV-H6
Page 11: ...11 12...
