SRS Labs CTC100, User Manual

Page: 70 / 177

Operation 58
CTC100 Programmable Temperature Controller
Saved macros: deletes all saved macros from local memory. Does not delete macros from USB
memory devices. Has no effect on running macros.
Display
Returns the front panel to the Select menu, de-selects all channels in all groups, and erases locally-
stored log data (data on USB drives is not affected). Returns all plots to autoscaled X and Y with a 1
minute X range and changes the plot location of all channels to 1. If a
*TRG
remote command was
previously received, re-enables automatic A/D conversions. Hides the monitor channels.
Ports: Closes all I/O ports and re-opens them. USB and Telnet connections are lost. The port
settings (baud rate, IP address, etc.) remain unchanged.
Port settings: Resets all I/O port settings to their factory defaults.
Channels: Resets the settings on the Channel menu for all channels to their factory defaults.
Also sets the A/D rate to 100 ms.
Log: Resets the default log rate to 1 second, sets the log rate for each channel to the default, and
enables automatic logging to USB. If a USB storage device is attached, erases log files in the root
directory and begins logging to USB.
All: resets all of the above items.
Setup screen for channels In 1 In 4
settings on this screen apply only to the channel in the
highlighted tab and will not affect any other channels. When using the remote commands the word
Channel, where it appears in italics, should be replaced with the channel name with spaces omitted.
For example, the remote command to
In1.name = "Sample A"
Na m e
Channel .Name = " New channel name "
Touch this button to change the name of the channel. The name must have 10 or fewer
characters.
V a lue
Channel .Value?
Channel ?
This button shows the most recent sensor reading. T be changed by typing in a
new value, so the button is greyed out.