SRS Labs CTC100, User Manual

Page: 56 / 177

Operation 44
CTC100 Programmable Temperature Controller
Num eric
System.display.type numeric
Touch the Numeric tab to see the current values of the selected channels as numbers. Up to 22
channels can be displayed. The more channels that are selected, the smaller the numbers are. If
enough space is available, the type of sensor or output may be displayed, and an annunciator may
appear that indicates whether the sensor or heater is disconnecte
of the channel
appears in bold if the channel uses a custom calibration table.
Touch one of the channels to go to its setup menu.
Zooming and panning
To change the X axis scale of a plot, touch anywhere inside the plot:
Touch the right half of the plot to zoom in
Touch the left half to zoom out
Drag to pan.
Whenever the most recent data is visible on the graph, the graph automatically scrolls to keep the
e
bottom-left corner of the screen to indicate that scrolling is disabled. To show current data and
.
Graphs that appear together on a screen always have the same X axis range. However, each
selection group has its own, independent X axis range.