Copyright By SRC
Design and Specification are subjected to change
Page 4
Step 3:
Secure the Nuts and tighten them fully and ensure
the brackets are seated squarely on the
Windshield brackets.
Step 4:
Mounting of the GPS Bar
The GPS Bar (3) has 2 Threaded
End Adaptors integral to it.
Slip in the Washer M8 (4) – 1 off
from either sides, and Screw M8 x
16 (5) – 1 off from either sides,
through the hole in the Brackets
and secure the threads to the End
Adaptor and tighten them to
torque as per specifications in the
BOM table.
