Copyright By SRC
Design and Specification are subjected to change
Page 3
Mounting Instructions
Step 1:
First step, while mounting the SRC-GPS Bar is to
remove the Wind-Shield screen, as shown.
The 2 sets of Screws/Washers and Nuts from each
side has to be removed and to be used for
mounting the brackets of the GPS Bar.
Step 2:
Orient and Align the Bracket RH (1) and Bracket LH (6), as
shown in the drawing and Slip-in the 2 sets of
Screws/Washers and Nuts, through the Mounting holes in
the side flap of the brackets, as shown.
