
10
Batteries
Component Batteries
The AXS Controller (A) and Pedal Sensor (C) batteries are pre-installed. The SRAM batteries (B) are included separately and must be fully
charged before installation and use.
A
C
B
B
A
B
C
NOTICE
If the AXS Controller coin cell battery is depleted, activating Flight Attendant, or any other paired AXS component, with the AXS Controller
is not possible until the battery is replaced.
If a SRAM battery or Pedal Sensor battery is depleted during use,
will be activated. Front and rear dampers will switch to OPEN
at the time of battery depletion and will remain open until the battery is recharged or replaced.
The Pedal Sensor
requires
a AAA Lithium/Iron Disulfide (Li/FeS
2
). Use
only
AAA Lithium/Iron Disulfide (Li/FeS
2
) batteries in the Pedal Sensor.
NOTICE
Hands and gloves must be clean before handling the SRAM battery. Contact with sunscreen or hydrocarbon cleaners may cause the
battery to crack.
⚠
WARNING
Consult the coin cell and AAA battery manufacturers for safe handling instructions.
Keep the batteries out of reach of children.
Do not put the battery in your mouth. If ingested, seek medical attention immediately.
Do not use sharp objects to remove the batteries.