SRAM RockShox Super Deluxe Flight Attendant, User Manual, Page: 25 / 41

25
Calibration Troubleshooting
System Time Out (Red LEDs):
If Calibration is not successful after 25 seconds during Vertical or Tilt Calibration, the OPEN,
PEDAL, and LOCK LEDs will flash Red simultaneously .
When the Red LEDs stop flashing, Calibration is canceled and the system will return to the
previously active mode.
Re-start the
Calibration process.
Exit (Red LEDs):
If any button on the Flight Attendant Control Module is pressed during Calibration, the OPEN,
PEDAL, and LOCK LEDs will flash Red simultaneously .
When the LEDs stop flashing, Calibration is canceled and the system will return to the
previously active mode.
Re-start the
Calibration process.
Rear Shock Error (Cyan LEDs)
If the rear shock was not detected during calibration, the OPEN, PEDAL, and LOCK LEDs
will flash Cyan simultaneously .
Wake the rear shock with movement and re-start the Calibration process. Check the rear
shock battery charge level if the rear shock does not awaken.