Model SR7005
i
Wall Mount In-Room Mini Scale
Operating and Service Manual
Part No. MAN7005i_200520
Page 5 of 16
S
Instruments, Inc.
,
600 Young Street, Tonawanda, NY 14150
Tel: 716-693-5977 Fax: 716-693-5854 URL:
www.srscales.com
email:
Copyright 2020
S
Instruments, Inc.
INSTALLATION (Cont’d)
STEP (d):
Mount the wall bracket to the wall by using the provided #8 x 1-1/2” Phillips flat head screws
into the self-drilling wall anchors or using customer supplied appropriate flat head screws long enough to
anchor into a wall stud or the concrete anchors.
STEP (e):
After the wall bracket is securely fastened to the wall, carefully lift the SR7005i scale and place
it onto the wall mounting bracket. Proceed to Step 4.
USING THE CROSSBAR MOUNTING HOLES
STEP (a):
Place the scale against the wall and carefully lower the platform. Make a mark at a stud location
for the two holes 16” apart (Figure 2).
For concrete walls, follow the same procedure, marking the two hole locations.
STEP (b):
For stud wall mounting locations without a stud, use a screwdriver to drive the provided self-
drilling wall anchors into the wall. It is not recommended to use a power drill to set the wall anchors.
For concrete wall mounting, install appropriate wall anchors at all marked screw locations.
STEP (c):
Attach the crossbar to the wall by using the provided #8 x 1-1/2” Phillips flat head screws into
the self-drilling wall anchors or using customer supplied appropriate flat head screws long enough to
anchor into a wall studs or the concrete anchors.
STEP 4:
Plug in the AC power supply and/or remove the battery cover and remove the plastic battery strip
to activate the six (6) “C” cell batteries. Reattach the battery cover.
MICROBAN ANTIMICROBIAL PROTECTION
Microban® antimicrobial technology has been added to help reduce the growth of bacteria as part of a
medical center's approach to creating a cleaner healthcare environment. For more information, visit
https://www.microban.com/sr-scales
IMPORTANT
THE WALL BRACKET IS INTENDED TO KEEP THE SCALE
FROM PULLING OFF OF THE WALL. ENSURE THAT THE
ENTIRE WEIGHT OF THE SCALE IS ON THE FLOOR AND
NOT ON THE WALL BRACKET.