Manual | Ventura 6x25W RGBAW Matrix Bar
8. TROUBLESHOOTING
PROBLEM
REASON AND ACTION
The lighting can’t
be started normally
Check the power connection is correct or not.
Please detect the voltage.
Power supply is damaged or incorrect connected. Call a qualified personnel to fix it.
Connection of control board is not correct. Call a qualified personnel to fix it.
Out of console’s control
Please check the DMX connector and the power connection is connected correctly or not.
It means having signal if it shows twinkling of the decimal point which in the lower right
corner of the screen when exiting the screen saver.
Please check the DMX address setting of lighting is correct or not.
Check (CHMD) setting is correct or not.
Please check whether the DMX line is near to the high voltage wire or not. In that case, it
will damage interfere the DMX electric circuit.
The beam appears dim ,
the brightness
declines obviously
Check whether the (CAL) is started or not and the set value is too small.
Check whether the (POW) is in over temperature protection situation or not, if yes, please
take measures for ventilation.
