Manual | Ventura 6x25W RGBAW Matrix Bar
7. Menu Instruction
7.1 DMX ADDRESS SETTING
»
1) Press the (ENTER) button in (ADDR) menu, then enter to the DMX address setting.
»
2) Press the (UP/DOWN) button to select (1-512) numerical value.
»
3) Press the (ENTER) button to escape and save.
7.2 STATIC SETTING
»
1) Press the (ENTER) button in (STAT) menu, then enter to the static setting.
»
2) Press the (UP/DOWN) button to select
(RED1) , (GREEN1) , (BLUE1) , (AMBER1) , (WHITE1)…(SHUT) .
»
3) Press the (UP/DOWN) button to set up the (0-255) numerical value.
»
4) Press the (ENTER) button to escape and save.
7.3 COLOR CAST CALIBRATION SETTING
»
1) Press the (ENTER) button in (CAL) menu, then enter to the color cast calibration setting.
»
2) Press the (UP/DOWN) button to select (RED) , (GREEN) , (BLUE) , (AMBER) , (WHITE)
»
3) Press the (UP/DOWN) button to set up the (0-255) numerical value.
»
4) On the (USE) interface, pressing (YES) button means valid, (NO) means invalid.
»
5) Press the (ENTER) button to escape and save.
»
Illustrations: When pressing the (YES) button which means valid on the (USE) interface, the actual
output value of RED, GREEN, BLUE, AMBER,WHITE, UV is output in accordance with the
percentage which the color cast calibration value divides 255.
7.4 CHANNEL MODE SETTING
»
1) Press the (ENTER) button in (CHMD】menu, then enter to the channel mode setting.
»
2) Press the (UP/DOWN) button to select
(68CH) , (60CH) , (28CH) , (28CH.) , (23CH) , (23CH.) , (18CH) , (11CH) , (6CH) , (5CH.)
»
3) Press the (ENTER) button to escape and save.
