Manual | Othello
DMX Terminator
For installations where the DMX cable has to run a long distance or is in an
electrically noisy environment, a DMX terminator on the last fixture of the
link prevents data reflection, which can corrupt the data communication on
the link.
Terminate the link by installing a 120 ohm, 1/4 watt (minimum) terminator
in the fixture’s Data Out (female) cable connector in the last fixture on each
DMX link.
8. Fixture Control Board
Using the Control Board to set the starting DMX address or make other settings. The functions provided are
described in the following sections.
(MENU)
Scroll through the main menu or exit from the current sub-menu.
(DOWN)
Scroll ‚DOWN‘ through the menu list or decrease the value of the current function.
(UP)
Scroll ‚UP‘ through the menu list or increase the value of the current function.
(ENTER)
Enter the currently selected menu or confirm the current function value.
Address
001-512
DMX address setting
Fixture
Channel Mode
Standard
33Chs
Reduced
26Chs
Pan/Tilt
Invert Pan
Off/On
Invert Tilt
Off/On
Swap Pan-Tilt
Off/On
Curve
Curve 1
Optional dimmer
curves
Curve 2
Curve 3
Summary of Contents for Othello
Page 1: ...SquareLED Othello...
