Manual | Othello
7. Linking Fixtures
The Othello fixture operates on standard DMX512 link controlled by a DMX console. The number of fixtures on
a link will be determined by the combined number of channels required by all the fixtures. An Othello fixture
requires a 26/33 channel footprint on a standard DMX512 link. Attach the fixture to the link using data-grade
cable and 5-pin or 3-pin XLR cable connectors.
Cable Connectors
The Othello fixture accepts both 3-pin and 5-pin XLR cable connectors. Cabling must have a male XLR connector
on one end of the cable and a female XLR connector on the other end.
To link one or more fixtures to a DMX controller:
• Connect the male XLR connector of a DMX Data cable to the controller’s DMX Data Outconnector.
• Connect the Data cable’s female XLR connector to the Data In connector of the first (or next) fixture on the
DMX link.
• Continue linking the remaining fixtures connecting a cable from the Data Out connector of each fixture to
the Data In connector of the next fixture on the link.
Summary of Contents for Othello
Page 1: ...SquareLED Othello...
