Manual | LED PAR 64 SLIM 7x10W RGBW
Set DMX Channel
Mode
Channels
(8)
edit
ENTER
exit
MENU/WAIT 5 SEC
change mode
UP/DOWN
save and exit
ENTER
cancel
MENU/WAIT 5 SEC
Device reaction
after DMX signal
disconnection
DMX Off (BLACK,
COLOR, DEMO,
SOUND)
edit
ENTER
exit
MENU/WAIT 5 SEC
change mode
UP/DOWN
save and exit
ENTER
cancel
MENU
Reset device
Reset
reset device
ENTER
Set fan noise level Fan Mode
(DISCO, THEATRE)
edit
ENTER
exit
MENU/WAIT 5 SEC
change ode
UP/DOWN
save and exit
ENTER/MENU/
WAIT 5 SEC
Set master or slave
mode
Mode
(MASTER, SLAVE)
edit
ENTER
exit
MENU/WAIT 5 SEC
change ode
UP/DOWN
save and exit
ENTER/MENU/
WAIT 5 SEC
Check device
lifetime and actual
temperature
Lifetime
(LIFETIME, TEMPE-
RATURE)
check tempera-
ture/lifetime
ENTER
exit
MENU/WAIT 5 SEC
Adjust permanent
color correction
Color correction
(RED, GREEN,
BLUE, WHITE)
edit SETTINGS
ENTER
exit
MENU/WAIT 5 SEC
change value
UP/DOWN
save and go to
next param.
ENTER
cancel current
param. edit/back
MENU/WAIT 5 SEC
To achieve the desired effect after making changes in Manual settings, Demo or Sound mode, you should:
1. Disconnect DMX signal
2. Set the appropriate device response in Menu -> DMX off
3. Set and save the parameters in the selected mode (Manual settings, Demo, Sound)
4. Wait about 1s in order to the device detected the DMX signal status
DMX channel list
DMX Channel (6CH)
Channel
Function
Effect
1
Dimmer
0-255: 0-100%
2
Strobo
0-11: No Function
11-255: Strobo 1-20Hz
3
Red
0-255: 0-100%
Menü
