Manual | LED PAR 64 SLIM 7x10W RGBW
Connecting power supply
The connection is performed using power cable with PowerCon connector (included).
The device must be operated by qualified personnel. Make sure that the power grid supply parameters are
consistent with device parameters and limitations are not exceeded.
CAUTION! In the case of cable damage do not attempt to repair. Replacement or repair can be made only on the
manufacturer or by a person with appropriate permissions.
6. Operation Manual
Control panel
The control panel is equipped with LCD display and 4 control buttons with the following functions:
1. MENU – enter to main menu, go back from the selected options, cancel changes
2. DOWN – choose option, edit parameter
3. UP – choose option, edit parameter
4. ENTER edit selected option, confirm changes
Menu
Menu diagram:
Change DMX
Address
Address
(1-255)
edit address
ENTER
exit
MENU/WAIT 5 SEC
change value
UP/DOWN
save value
ENTER
cancel
MENU
Set manual
color and dimmer
settings
Manual settings
(DIMMER, RED,
GREEN, BLUE,
WHITE)
edit settings
ENTER
exit
MENU/WAIT 5 SEC
apply settings
to device
DISCONNECT DMX
SIGNAL, WAIT 3 SEC
change value
UP/DOWN
save and go to
next param.
ENTER
cancel current
param. edit/back
MENU/WAIT
5 SEC
Turn on Sound
Mode
Sound
(ON, OFF)
turn on
ENTER
exit
MENU/WAIT 5 SEC
turn off
ENTER/MENU
Turn On Manual
Strobo
Strobo
(ON, OFF)
turn on
ENTER
exit
MENU/WAIT 5 SEC
turn off
HOLD
ENTER/MENU
Turnn on Demo
Mode
Demo
(ON, OFF)
turn on
ENTER
exit
MENU/WAIT 5 SEC
turn off
ENTER/MENU/
UP/DOWN
